| Sign In | Join Free | My himfr.com |
|
| Ask Lasest Price | |
| Brand Name : | SINOMEMB |
| Model Number : | SNU-P |
| Certification : | NSF |
| Product Specifiation | ||||||||
| Product Picture | Item No:PVDF Hollow fiber-SNU-O | |||||||
| 1.Model:PVDF 2.Appearance: 3.Pore size:0.1Micron 4.inner diameter:0.7mm 5.OD(outer diameter):1.3mm 6.Breaking point pressure MPa > 0.50 (alcohol) 7.Test moisture content:≤10% 8.Initial water flux of single filament:≤500L/㎡.h 9.Tensile strength at break (N) > 3.3 10.Elongation (%) > 160 11.nitial bubble point pressure MPa > 0.25 | ||||||||
| Packing : | 1.In 2.CBM: 3.N/G weight | |||||||
Operation Guide
During the operation of the UF system, it is necessary to avoid
sudden changes in pressure during system start-up, shutdown,
operation, cleaning, maintenance, etc., as well as exceeding the
maximum withstand pressure specified in this manual, to prevent
possible membrane breakage, sealing, etc. End fall off, membrane
shell cracking and other serious damage consequences; this series
of products have been treated with anti-corrosion and membrane wire
protection before leaving the factory, and the inner membrane wire
of the module is in a semi-dry state. For manual operation, the
water production rate should be set to 50% of the design water
production rate, and the initial water production must be
discharged directly and cannot be used as product water.
Product usage tips
The normal start-up and normal cleaning and maintenance of the UF system are the key to ensure the long-term normal use of membrane products. Before starting the system, it should be ensured that the parameters of each valve, instrument, pre-processing equipment, signal transmission equipment, power equipment, etc. meet the design specifications and requirements, so as to ensure the safe, stable and up-to-standard operation of the overall system. Please refer to the product technical manual for the debugging and testing work of the system in the early stage.
|